Lamborghini dual 24v 200w scooter motors

Use this area as your personal project pages or blog! Each thread belongs to one user as a project page!
Post Reply
User avatar
Coopz
Jeep Jacker
Posts: 153
Joined: Tue Jan 01, 2013 5:21 am
Location: newcastle australia
Contact:

Lamborghini dual 24v 200w scooter motors

Post by Coopz »

I bought this 6v volt Lamborghini a year a go for $100 of gumtree. Involved another 100+km south trip to Sydney to pick it up.It was a bit smaller than I thought but looked pretty cool.
image.jpeg

After retiring the Ferrari enzo I decided to switch some of the running gear over the the Lamborghini. Foot pedals and ESC,having a couple of 200w motors (bought 5 scooters for $200 fixed one up and sold it for $200,Winning! :lol: )
Sunny helping me sort out the frame
Sunny helping me sort out the frame
Ferarri frame and lamborghini mock up frame
Ferarri frame and lamborghini mock up frame
Attachments
had to cut a bit out of the front to strengthen the steering set up
had to cut a bit out of the front to strengthen the steering set up
I used the front wheels of 2 power tech rides ( slammer and a go cart)
I used the front wheels of 2 power tech rides ( slammer and a go cart)
attached the belt drive sprocket to the wheels and added a 12mm flange inside the hub
attached the belt drive sprocket to the wheels and added a 12mm flange inside the hub
starting to take shape
starting to take shape
pedals
pedals
ready for a test drive
ready for a test drive
Last edited by Coopz on Sat Jan 23, 2016 6:52 pm, edited 1 time in total.


User avatar
Coopz
Jeep Jacker
Posts: 153
Joined: Tue Jan 01, 2013 5:21 am
Location: newcastle australia
Contact:

Re: Lamborghini dual 24v 200w scooter motors

Post by Coopz »

first test drive up the park was a success. speed testing with a app on my phone ran 20.1 kmph . a kilometre faster than the ferrari.

http://www.youtube.com/watch?v=_YH_dFgxSvc
test 2 was to see how it handled a longer run. this was a problem. the relays were only 10 amp rated and failed, melted in fact. so i swapped them for some 24v 30amp rated ebay relays i had ordered a few months back ($10).Generally my son and i do missions into Newcastle along the cycle way ,dead flat apart from the bridge leading out of my suburb Carrington.15km round trip is the average and has been succesful on one charge with the ferrari.
about 4 km into the ride the lambo stopped, relay melted agian. figuring it must be drawing a fair few amps this ride.Went to Jaycar electronics and bought 2 24v 30amp relays put them in (much better quality) and have had no problems with the ride since.
https://www.youtube.com/watch?v=grIAPsG4SG0
3 weeks of driving and the car is very relaible. belts have stretched abit and adjusted accordingly.


took the rubber traction bands off and let Sunny have some drifting fun.
https://www.youtube.com/watch?v=eZOjZEk3Kxc https://www.youtube.com/watch?v=U9XUYFNCobs
Last edited by Coopz on Thu Mar 17, 2016 5:18 am, edited 1 time in total.
User avatar
toycrusher
Administrator
Posts: 2747
Joined: Wed May 22, 2013 8:43 am
Location: South Texas

Re: Lamborghini dual 24v 200w scooter motors

Post by toycrusher »

Awesome! 8-)
"I'm not nuts, I prefer to be called an enthusiast! "

"I've stood on the shoulders of geniuses, and taken the next step..." ;-)

Image

Master Project List
(F150 6x6, 36v Superpower, 24v Beach Ranger 4x4, McQueen "El Relampago", 36v Polaris, Mudvette, Lil jeep dragster & mudder, 36v Rzr, Lifted Cowboy's jeep, FJ cruiser, Lil quad 18v, etc...)

Toycrushers Master Wiring Diagrams
Slowpoke
New member
Posts: 28
Joined: Sat Nov 21, 2015 6:21 pm

Re: Lamborghini dual 24v 200w scooter motors

Post by Slowpoke »

Nice work.
redline
Switch Cleaner
Posts: 82
Joined: Sun Jan 20, 2013 7:21 pm
Location: Brisbane, Australia

Re: Lamborghini dual 24v 200w scooter motors

Post by redline »

hey hey. have chatted to you on youtube previously.
Do you have any close up pics of your motor and drive belt setup?
Rob222
Cpl. Battery Boiler
Posts: 482
Joined: Mon May 12, 2014 4:04 pm

Re: Lamborghini dual 24v 200w scooter motors

Post by Rob222 »

Very cool. Using belts instead of chains seems to be a good setup.
User avatar
Coopz
Jeep Jacker
Posts: 153
Joined: Tue Jan 01, 2013 5:21 am
Location: newcastle australia
Contact:

Re: Lamborghini dual 24v 200w scooter motors

Post by Coopz »

Hey redline . I'll get a few pics tommorrow. Yeah the belts work fine to .
Attachments
Motor set up
Motor set up
Using a come along to tension the belts.
Using a come along to tension the belts.
Last edited by Coopz on Tue Feb 02, 2016 3:04 am, edited 1 time in total.
User avatar
Coopz
Jeep Jacker
Posts: 153
Joined: Tue Jan 01, 2013 5:21 am
Location: newcastle australia
Contact:

Re: Lamborghini dual 24v 200w scooter motors

Post by Coopz »

installed a 50amp speed controller today. Neat looking unit from motion dynamics.

https://www.motiondynamics.com.au/12v-3 ... model.html
Attachments
image.jpeg
image.jpeg
redline
Switch Cleaner
Posts: 82
Joined: Sun Jan 20, 2013 7:21 pm
Location: Brisbane, Australia

Re: Lamborghini dual 24v 200w scooter motors

Post by redline »

oh nice I had been looking at motion dynamics to source the metal foot pedal you have there. Pretty hard to come by in australia. Their speed controllers seem to be pretty good quality.

I have a couple complete 24v scooters to strip for parts but they are both chain drive to trying to decide if i will work with that or try a belt drive.
User avatar
Coopz
Jeep Jacker
Posts: 153
Joined: Tue Jan 01, 2013 5:21 am
Location: newcastle australia
Contact:

Re: Lamborghini dual 24v 200w scooter motors

Post by Coopz »

Use the chain cause it's easier to get bigger or smaller sprockets. I've been trying to find the same belt sprocket (the aluminium 200mm) but have no luck. . I've bought all my pedals from motion dynamics and they are cool to talk to as well. I've got the speed controller hooked up just waiting for me to knock off early from work to get my young bloke to test it. I'd recommend the controller as it has the brake . Will make a test video .

I'm building a Lightning McQueen will post the progress up soon. Running a 48v 1000w motor and pretty sure I'm gonna use this controller at 24v/36v. I spent a shitload on a Kelly controller but the wiring is a bit of a mission so these motion dynamics controllers are simple.
redline
Switch Cleaner
Posts: 82
Joined: Sun Jan 20, 2013 7:21 pm
Location: Brisbane, Australia

Re: Lamborghini dual 24v 200w scooter motors

Post by redline »

Nice ... have been eyeing off their speed controllers so looking forward to seeing your results.
User avatar
Coopz
Jeep Jacker
Posts: 153
Joined: Tue Jan 01, 2013 5:21 am
Location: newcastle australia
Contact:

Re: Lamborghini dual 24v 200w scooter motors

Post by Coopz »

This car is sorted now, took it on a 12km run this morning clocked in at 20.6kmh. Another video of sunny testing the brakes (regen brakes)
https://www.youtube.com/watch?v=LE6MmhZ2pP4
Last edited by Coopz on Thu Mar 17, 2016 5:19 am, edited 2 times in total.
redline
Switch Cleaner
Posts: 82
Joined: Sun Jan 20, 2013 7:21 pm
Location: Brisbane, Australia

Re: Lamborghini dual 24v 200w scooter motors

Post by redline »

Do you know how many amps it is pulling under load?
Slowpoke
New member
Posts: 28
Joined: Sat Nov 21, 2015 6:21 pm

Re: Lamborghini dual 24v 200w scooter motors

Post by Slowpoke »

How does the brakes work? Is it automatic when you lift off the pedal?
User avatar
toycrusher
Administrator
Posts: 2747
Joined: Wed May 22, 2013 8:43 am
Location: South Texas

Re: Lamborghini dual 24v 200w scooter motors

Post by toycrusher »

Those laughs say it all! :D
"I'm not nuts, I prefer to be called an enthusiast! "

"I've stood on the shoulders of geniuses, and taken the next step..." ;-)

Image

Master Project List
(F150 6x6, 36v Superpower, 24v Beach Ranger 4x4, McQueen "El Relampago", 36v Polaris, Mudvette, Lil jeep dragster & mudder, 36v Rzr, Lifted Cowboy's jeep, FJ cruiser, Lil quad 18v, etc...)

Toycrushers Master Wiring Diagrams
User avatar
Coopz
Jeep Jacker
Posts: 153
Joined: Tue Jan 01, 2013 5:21 am
Location: newcastle australia
Contact:

Re: Lamborghini dual 24v 200w scooter motors

Post by Coopz »

Not really sure of the amps. but it was melting the connectors on the relay. So this controller is good to handle up to 50amps . So far,we have been doing runs into town and have had no dramas. The brake is activated when the foot is off the pedal.
User avatar
Coopz
Jeep Jacker
Posts: 153
Joined: Tue Jan 01, 2013 5:21 am
Location: newcastle australia
Contact:

Re: Lamborghini dual 24v 200w scooter motors

Post by Coopz »

Last edited by Coopz on Thu Mar 17, 2016 5:20 am, edited 1 time in total.
User avatar
Coopz
Jeep Jacker
Posts: 153
Joined: Tue Jan 01, 2013 5:21 am
Location: newcastle australia
Contact:

Re: Lamborghini dual 24v 200w scooter motors

Post by Coopz »

Wheel change is on the cards,probably go back to a rubber wheel. https://www.youtube.com/watch?v=_9DGJ5PGkXY
Post Reply